• Doubles​ ​the​ ​amount​ ​of​ ​Pages available
• Doubles​ ​the​ ​amount​ ​of​ ​Tracks​ ​per​ ​Page
• Doubles​ ​the​ ​amount​ ​of​ ​Concurrent​ ​Pages
• Multiplies​ ​by​ ​4​ ​the​ ​amount​ ​of​ ​Concurrent​ ​Tracks
• Multiplies​ ​by​ ​4​ ​the​ ​amount​ ​of​ ​Steps
• Allows​ ​Chords​ ​having​ ​the​ ​same​ ​note​ ​on​ ​multiple​ ​octaves​ ​(Chords​ ​v2),​ ​either by​ ​Midi​ ​input​ ​in​ ​any​ ​of​ ​the​ ​Recording​ ​Modes​ ​or​ ​by​ ​manual​ ​(keyed)​ ​input
• Adds​ ​-​ ​Chase​ ​Light​ ​Follow​ ​for​ ​Track​ ​Chains
• Adds​ ​-​ ​Reset​ ​to​ ​First​ ​Page​ ​on​ ​Page​ ​Cluster​ ​Follow
• Adds​ ​-​ ​“on​ ​the​ ​beat”​ ​Grid​ ​Modes
• Improves​ ​Recording​ ​re-take
• Step​ ​Zoom​ ​now​ ​available​ ​from​ ​all​ ​Page​ ​Edit​ ​State’s
• Cluster​ ​Page​ ​Hold​ ​function
• Fixed ​all​ ​known​ ​Bugs

We​ ​present​ ​​​a​ ​redesign​ ​of​ ​step​ ​chords​ ​that​ ​removes​ ​the​ ​current​ ​limitation​ ​of​ ​the​ ​UI​ ​/ REC​ ​mode,​ ​which​ ​has​ ​no​ ​ability​ ​to​ ​stack​ ​notes​ ​within​ ​the​ ​chord​ ​on​ ​the​ ​octave​ ​i.e.​ ​C1, C2,​ ​C3​ ​are​ ​not​ ​possible​ ​to​ ​combine​ ​on​ ​the​ ​current​ ​Step.
A​ ​work​ ​around​ ​of​ ​course​ ​is​ ​to​ ​have​ ​other​ ​track(s)​ ​fill​ ​in​ ​the​ ​octave​ ​notes,​ ​but​ ​this hampers​ ​the​ ​workflow​ ​fluency​ ​(especially​ ​when​ ​recording).​ ​​​​​Addressing​ ​this​ ​limitation is​ ​what​ ​Chord​ ​V2​ ​is​ ​all​ ​about.

In​ ​Grid​ ​Edit​ ​Mode​ ​holding​ ​a​ ​Page​ ​button​ ​and​ ​turning​ ​the​ ​STA​ ​encoder​ ​will,​ ​as​ ​before, set​ ​the​ ​number​ ​of​ ​page​ ​repeats,​ ​however​ ​in​ ​this​ ​new​ ​feature​ ​the​ ​Page​ ​STA​ ​may​ ​now be​ ​set​ ​to​ ​zero.​ ​If​ ​a​ ​page​ ​has​ ​a​ ​STA​ ​of​ ​zero​ ​if​ ​will​ ​repeat​ ​indefinitely​ ​-​ ​thus​ ​it​ ​is​ ​now possible​ ​to​ ​play​ ​part,​ ​or​ ​all,​ ​of​ ​a​ ​Cluster​ ​without​ ​looping​ ​back​ ​to​ ​the​ ​first​ ​page.

When​ ​in​ ​Edit​ ​Steps​ ​state​ ​or​ ​Edit​ ​Perform​ ​state,​ ​with​ ​a​ ​matrix​ ​Step​ ​button​ ​held​ ​- clicking​ ​the​ ​Step​ ​Mode​ ​button​ ​will​ ​enter​ ​Step​ ​zoom,​ ​thus​ ​steps​ ​can​ ​now​ ​be​ ​toggled on/off​ ​or​ ​fully​ ​edited​ ​from​ ​all​ ​Page​ ​Edit​ ​state's.
Note,​ ​with​ ​a​ ​single​ ​matrix​ ​Step​ ​button​ ​held​ ​the​ ​Step​ ​Mode​ ​led​ ​will​ ​be​ ​lit​ ​red​ ​-​ ​indicating that​ ​Step​ ​Zoom​ ​is​ ​available​ ​for​ ​that​ ​step.

In​ ​a​ ​change​ ​to​ ​legacy​ ​behaviour,​ ​starting​ ​the​ ​sequencer​ ​will​ ​not​ ​delete​ ​notes​ ​from​ ​the track​ ​currently​ ​selected​ ​for​ ​recording​ ​-​ ​this​ ​now​ ​allows​ ​a​ ​track​ ​to​ ​be​ ​overdubbed. However,​ ​in​ ​addition​ ​to​ ​using​ ​Clear​ ​there​ ​are​ ​two​ ​options​ ​to​ ​remove​ ​previously recorded​ ​notes​ ​as​ ​follows:-​ ​​​Whilst​ ​the​ ​sequencer​ ​running​ ​(and​ ​a​ ​track​ ​is​ ​armed​ ​for recording),​ ​clicking​ ​the​ ​Play​ ​button​ ​will​ ​delete​ ​the​ ​track​ ​under​ ​the​ ​chase​ ​light​ ​-​ ​and,​ ​if recording​ ​to​ ​a​ ​track​ ​chain​ ​a​ ​double-click​ ​of​ ​the​ ​Play​ ​button​ ​will​ ​delete​ ​all​ ​notes​ ​in​ ​the track​ ​chain.

Note:​ ​Whilst​ ​armed​ ​for​ ​recording​ ​the​ ​Align​ ​function​ ​will​ ​not​ ​be​ ​available​ ​because​ ​the Play​ ​button​ ​is​ ​used​ ​for​ ​the​ ​track/chain​ ​clear​ ​function.

In​ ​Grid​ ​mode:

​Activation/deactivation​ ​of​ ​Pages​ ​occurs​ ​instantly
Grid​ ​Edit​ ​mode​ ​(default) Edit​ ​LED​ ​flashing​ ​Orange, ​Click​ ​Edit​ ​button​ ​once
Grid​ ​Live​ ​mode Edit​ ​LED​ ​Green, Double​ ​click​ ​Edit​ ​button

​Activation/deactivation​ ​of​ ​Pages​ ​occurs​ ​'on​ ​the​ ​beat' Grid​ ​Edit​ ​'on​ ​the​ ​beat'​ ​mode Edit​ ​LED​ ​flashes​ ​Red ​Click​ ​Edit​ ​button​ ​once
Grid​ ​Live​ ​'on​ ​the​ ​beat'​ ​mode Edit​ ​LED​ ​Red

Chase​ ​light​ ​follow:

​Double​ ​click​ ​Mode​ ​Step​ ​button​ ​to​ ​activate
When​ ​multiple​ ​tracks​ ​are​ ​chained​ ​the​ ​page​ ​view​ ​will​ ​change automatically​ ​between​ ​tracks​ ​1​ ​to​ ​4​ ​and​ ​tracks​ ​5​ ​to​ ​8​ ​following
the​ ​chase​ ​light.
It​ ​should​ ​be​ ​noted​ ​that​ ​when​ ​starting​ ​the​ ​sequencer​ ​with​ ​the​ ​matrix view​ ​not​ ​showing​ ​the​ ​head​ ​of​ ​the​ ​chain,​ ​then​ ​the​ ​matrix​ ​view​ ​will change​ ​to​ ​show​ ​the​ ​chase​ ​light.

NB:​ ​When​ ​chase​ ​light​ ​follow​ ​is​ ​active​ ​the​ ​Mode​ ​Step​ ​LED​ ​will​ ​be flashing​ ​when​ ​representing​ ​the​ ​matrix​ ​view​ ​options​ ​above.

Reset​ ​to​ ​First​ ​Page​ ​in​ ​Cluster:
When​ ​in​ ​Nemo​ ​PAGE​ ​follow​ ​mode​ ​on​ ​STOP​ ​/​ ​PLAY​ ​display reset​ ​to​ ​Bank​ ​first​ ​page.